بلنک های زیرکونیوم مولتی لایر pritidenta HT

For all open milling machines that accept round blanks with a diameter of 98.5 mm
priti®multidisc ZrO2 multicolor High Translucent is the material of choice for the most vibrant, highest aesthetics on restorations with up to three pontics.

(5Y-TZP) available in 7 color gradients and 1 bleach shade, 49% translucence, flexural strength > 650 MPa.
Adjusting the position in the same disc allows all 16 Vita shades to be achieved with just 7 blanks!

INDICATION

You can use priti®multidisc ZrO2 multicolor High Translucent to fabricate inlays, onlays, veneers, partial crowns, anatomically reduced and monolithic, fully anatomical crowns and bridges (up to three pontics) for anterior and posterior areas Translucence is comparable to that of lithium disilicate. Its high translucence and integrated color gradient mean the material is particularly suitable for efficient fabrication of non-veneered restorations.

MATERIAL

Zirconium dioxide Type II, Class 4 (DIN EN ISO 6872)
Flexural strength > 650 MPa
High translucence of 49%
Brilliant aesthetics
CTE 10 ·10-6 · K-1
Thin wall thicknesses of 0.4 mm for single crowns in the anterior tooth area and 0.6 mm in the posterior tooth area
Precise edges and margins due to highly compacted material
Veneering possible with any ceramic mapped to the CTE of ZrO2
Cross-batch color fidelity
Homogeneous block shading
Color can be reproduced at any time
Biocompatible

CHEMICAL COMPOSITION

Zirconium dioxide (ZrO2/HfO2): 89.89 – 90.7 %
Yttrium oxide (Y2O3): 8.55 – 10.11 %
Aluminum oxide (Al2O3): < 0.2 %
Other oxides: < 0.7 %